POWEROUT
The Power Ezy-Out
Left-hand drill bits that work with your power drill.
- For use in removing normal right hand threads.
- 50-80% of broken bolts will loosen and come out simply by drilling in reverse.
- Powerout™ is a left-hand drill system designed to take advantage of this effect.
- You simply drive them anti-clockwise using a reversible drill.
- As you drill, you drive broken bolts and studs out.
Australian Authorized Importer | Fast Australia-Wide Delivery | Trade Supplier
Tradesman Set
Contains 11 Powerouts™ from 1/16" to 3/8" by 1/32" increments and a Diamohard™ Starter Burr.
Part Number: PO-TS
Contact UsProfessional Set
Contains 15 Powerouts™ from 1/16" to 1/2" by 1/32" increments and a Diamohard™ Starter Burr.
Part Number: PO-TS
Contact UsComplete Part Number Reference
All Powerout™ left-hand drill bits are available individually or in sets. Each size includes corresponding diameter and length specifications.
| Part Number | Diameter | Length | Part Number | Diameter | Length |
|---|---|---|---|---|---|
| PO-0116 | 1/16" | 1 5/8" | PO-0516 | 5/16" | 2 13/16" |
| PO-0332 | 3/32" | 1 3/4" | PO-1132 | 11/32" | 3" |
| PO-0108 | 1/8" | 1 7/8" | PO-0308 | 3/8" | 3 1/8" |
| PO-0532 | 5/32" | 2 1/16" | PO-1332 | 13/32" | 3 5/16" |
| PO-0316 | 3/16" | 2 3/16" | PO-0716 | 7/16" | 3 7/16" |
| PO-0732 | 7/32" | 2 3/8" | PO-1532 | 15/32" | 3 5/8" |
| PO-0104 | 1/4" | 2 1/2" | PO-0102 | 1/2" | 3 3/4" |
| PO-0932 | 9/32" | 2 11/16" | DS-0104 | Starter Burr | |
Diamohard™ Starter Burr: Part Number DS-0104
A special hard rotary burr used for getting a centre on hard materials before using Powerout. Included in all Powerout sets.
How to Use Powerout to Remove Broken Bolts
Start by getting a centre BEFORE attempting Powerout™:
- - Use the side of the Diamohard™ burr (supplied) to flatten any jagged surface.
- - Then use the burr (end on) to make a central depression.
- - NOTE: The burr must be driven clockwise.
Make sure Pow--er--Out™ is sharp before use. This increases the chance of successful backout.
- - If necessary, sharpen it on a normal grinding wheel using the same methods as for ordinary HSS drill bits.
Do NOT use coolant or cutting compound.
Use very slow speeds (e.g. 200 to 500 RPM).
- - Where possible, fixture the job and use a drill press or milling machine.
- - Breakage and "off centre" are more likely in handheld jobs.
Essential Workshop Tools
Powerout extractors are essential tools for any workshop or garage. Don't let broken fasteners slow down your work. Contact us for expert advice and fast delivery.